Torque Solution Thermal Throttle Body Gasket: Honda / Acura OBD2 B Series 60mm - TS-TBG-003

The Torque Solution Thermal Throttle Body Gasket (TS-TBG-003) is a purpose-built replacement and upgrade gasket designed specifically for Honda and Acura OBD2 B Series engines with a 60mm throttle body. Whether you're refreshing a worn factory gasket or fitting an aftermarket throttle body, this Torque Solution piece is engineered to deliver a reliable, leak-free seal on the B Series applications that enthusiasts and daily drivers alike depend on.

Key Features & Benefits

• Thermal design for OBD2 B Series fitment: Engineered specifically for OBD2 Honda and Acura B Series engines, so you're not adapting a generic gasket — this is a purpose-matched part that installs cleanly against factory mating surfaces.
• Optimized for performance and efficiency: The thermal gasket design is engineered to minimize heat transfer between the throttle body and intake manifold, helping the incoming air charge stay cooler — a known benefit for naturally aspirated and forced-induction B Series builds alike.
• Leak-free sealing: Like all Torque Solution thermal throttle body gaskets, this gasket is designed to replace factory gaskets and provide a secure, leak-free seal — eliminating the vacuum leaks that can cause rough idle, poor throttle response, and failed emissions tests on aging B Series engines.
• Compatible with oversized throttle body setups: Based on Torque Solution's own product line guidance, these thermal gaskets are also well-suited for use with oversized throttle body setups — making this a relevant upgrade part, not just a maintenance item.
• Direct bolt-on installation: Designed as a direct replacement, this gasket installs in place of the factory unit without modification, keeping installation straightforward for a DIY garage build or professional shop.
• From a recognized performance gasket manufacturer: Torque Solution is a well-regarded name in the Honda/Acura performance community with a broad catalog of thermal gaskets spanning dozens of platforms.

Specifications

• Part Number: TS-TBG-003
• SKU: TQSTS-TBG-003
• Application: Honda / Acura OBD2 B Series — 60mm throttle body
• Condition: New
• Package Dimensions (approx.): 4.00" W × 1.00" H × 6.00" D

Fitment

This gasket is confirmed to fit the following Honda and Acura OBD2 B Series vehicles and trims:

• Acura Integra GS — 1990–1993, 1997–2001
• Acura Integra GS-R — 1992–2001
• Acura Integra LS — 1990–2001
• Acura Integra RS — 1990–1998
• Acura Integra Special Edition — 1995–1996
• Acura Integra Type R — 1997–1998, 2000–2001
• Honda Civic Si — 1999–2000
• Honda Civic del Sol VTEC — 1996–1997
• Honda CR-V EX — 1998–2001
• Honda CR-V LX — 1997–2001
• Honda CR-V SE — 2000–2001

Important note on sizing: This is the 60mm version (TS-TBG-003). If your B Series build uses a 70mm throttle body, Torque Solution offers a separate 70mm variant — verify your throttle body bore size before ordering to ensure correct fitment.

What's in the Box

• 1× Torque Solution Thermal Throttle Body Gasket (60mm, OBD2 B Series)

Why Buy from ThreePiece.us

• Free shipping on every order — no minimum required, no hidden handling fees at checkout.
• Affirm financing available — spread your purchase over time with flexible lease-to-own and financing options at checkout.
• Expert fitment support — our team has served 10,000+ customers and can help you verify this gasket fits your specific B Series build before you buy. Call us at 813-535-5801 or email [email protected].
• In-stock and ready to ship — no waiting on long lead times for this regularly stocked performance part.
• Price Match Guarantee — found it lower somewhere else? We'll match it.

Frequently Asked Questions

Q: Will this gasket fit my OBD1 B Series Honda or Acura?
A: This gasket is specifically designed for OBD2 B Series applications (generally 1996 and newer for Honda/Acura). OBD1 B Series engines (pre-1996) use a different throttle body configuration. If you have an OBD1 car, contact our fitment team before ordering so we can point you to the correct part.

Q: Is the 60mm size right for my stock B Series throttle body?
A: The stock OBD2 B Series throttle body is a 60mm unit on most of the applications listed above, so this gasket is the correct choice for a factory-configuration engine. If you've already upgraded to a larger aftermarket throttle body — such as a 70mm unit — Torque Solution makes a separate gasket for that application. Always confirm your throttle body bore before ordering.

Q: Can this gasket be used with an aftermarket or oversized throttle body?
A: Torque Solution's thermal throttle body gaskets are noted to be suitable for oversized throttle body setups in addition to replacing factory gaskets. However, if your aftermarket throttle body is larger than 60mm, you will need the appropriate larger-bore gasket. This specific part (TS-TBG-003) is sized for 60mm applications.

Q: How do I get help confirming this part fits my car before I order?
A: You can reach ThreePiece.us fitment specialists by phone at 813-535-5801 or by email at [email protected]. We're happy to cross-reference your year, make, model, and trim to confirm compatibility before you place your order.