Torque Solution Billet Transmission Mount: Mitsubishi Eclipse / Talon 1G DSM Manual AWD 90-94 - TS-1G-005

The Torque Solution Billet Transmission Mount (TS-1G-005) is a direct OEM replacement transmission mount engineered specifically for the 1990–1994 Mitsubishi Eclipse and Eagle Talon 1G DSM with a manual transmission and AWD drivetrain. Built from aerospace-grade 6061-T6 billet aluminum with urethane bushings and steel pins, this mount is a proven upgrade spotted on some of the fastest DSMs on the street and at the track. If your factory rubber mount is worn, cracking, or simply can't handle the demands of a built 1G, this is the upgrade DSM enthusiasts have been trusting for years.

Key Features & Benefits

• High-Grade 6061-T6 Billet Aluminum Construction — Machined from lightweight 6061-T6 aluminum, this mount is dramatically more rigid and durable than the OEM rubber unit, resisting deflection under hard acceleration and high-horsepower loads.
• 75A Durometer Urethane Bushings — The 75A urometer urethane bushing material strikes a balance between street drivability and race-level firmness, reducing drivetrain slop without turning your cabin into a jackhammer.
• Steel Pins — Steel pin construction adds structural integrity to the bushing assembly, ensuring the mount stays together under repeated high-torque events.
• Eliminates Wheel Hop & Traction Loss — By keeping the transmission solidly located, this mount directly addresses one of the most common complaints on modified AWD DSMs: wheel hop and inconsistent launches.
• Improved 60-Foot Times & E.T.s — Tighter drivetrain mounts translate to more consistent power delivery to all four wheels, which shows up immediately in drag strip numbers.
• 1,000 HP+ and 8-Second E.T. Torture Tested — Torque Solution validates this mount against the kind of abuse a serious built DSM can dish out, so it's ready for everything from daily-driven boost builds to full-send strip cars.
• Black Anodized Finish with Laser Engraving — Looks sharp in the engine bay and resists corrosion over time.
• Direct OEM Replacement Fitment — Bolts directly in place of the factory transmission mount with no cutting, welding, or fabrication required.
• Lifetime Warranty — Torque Solution backs this mount with a lifetime warranty, reflecting confidence in the build quality.

Specifications

• Part Number: TS-1G-005
• Brand: Torque Solution
• Material: Lightweight 6061-T6 billet aluminum
• Bushing Material: Urethane, 75A durometer
• Hardware: Steel pins
• Finish: Black anodized with Torque Solution laser engraving
• Mount Type: Transmission mount (direct OEM replacement)
• Tested To: 1,000+ HP and 8-second E.T.s
• Warranty: Lifetime

Fitment

This transmission mount is designed specifically for:

• 1990–1994 Mitsubishi Eclipse 1G DSM — Manual Transmission, AWD
• 1990–1994 Eagle Talon 1G DSM — Manual Transmission, AWD

Important fitment notes: This mount is confirmed for the manual transmission, AWD variant of the 1G DSM platform. It is not listed for FWD 1G DSM models or for automatic transmission applications — if your 1G is front-wheel-drive or automatic, verify compatibility before ordering. It is also not intended for the 2G Eclipse/Talon (1995–1999) or any later Eclipse generation. For best results, Torque Solution recommends pairing this transmission mount with their complementary 1G passenger-side engine mount, front engine mount, and rear engine mount to fully address drivetrain movement.

What's in the Box

• 1x Torque Solution Billet Transmission Mount (TS-1G-005)

Why Buy from ThreePiece.us

• Free Shipping on Every Order — No minimums, no surprises at checkout.
• Affirm Financing Available — Spread the cost of your DSM build over time with flexible payment plans through Affirm.
• Expert Fitment Help — Not sure if this is the right mount for your specific 1G build? Our team knows DSM fitment and is here to help you get the right part the first time.

Frequently Asked Questions

Does this mount fit both FWD and AWD 1G DSMs?

No. Part number TS-1G-005 is specifically listed for the Manual AWD variant of the 1990–1994 Mitsubishi Eclipse / Eagle Talon 1G DSM. FWD 1G models are not listed in the fitment for this particular mount. Double-check your drivetrain configuration before ordering.

Will this mount increase cabin vibration compared to the stock rubber mount?

The urethane bushings used in this mount are rated at 75A durometer — firmer than factory rubber but not as harsh as solid mounts. Most street/strip DSM owners find the 75A bushing offers a manageable increase in NVH (noise, vibration, harshness) while delivering meaningfully better drivetrain control. Your experience may vary depending on your overall mount setup.

Should I replace other mounts at the same time?

Torque Solution recommends using this transmission mount together with their passenger-side engine mount, front engine mount, and rear engine mount for best results. Replacing only one mount while leaving worn or soft factory mounts elsewhere can limit the improvement in wheel hop reduction and launch consistency.

Does this require any modifications to install?

This is a direct OEM replacement — it is designed to install in place of the factory transmission mount without cutting, welding, or custom fabrication. Standard hand tools and basic mechanical ability are all that's required for most 1G DSM owners.