1991 Nissan 240SX Wheels and Rims

The S13 240SX is the blank canvas of the drift world: a featherweight, rear-drive coupe with near-perfect balance and an aftermarket that never quit. Whether you're chasing tandem entries or a clean street look, the right wheels transform how this chassis behaves and how it sits. Every set here ships free with verified fitment for your 1991 240SX, and financing is available so you can grab the setup you actually want.

1991 Nissan 240SX fitment specs

  • Bolt pattern: 4x114.3
  • Center bore: 66.1mm
  • OE wheel diameter: 15"
  • OE offset: ET40
  • Setup: square (non-staggered)
  • Drivetrain: RWD hatchback

Since 4x114.3 is one of the most supported patterns in the JDM scene, you can shop all 4x114.3 wheels to cross-shop every fitment in your stud spacing.

Recommended setups

  • Enkei — lightweight, time-tested classics like the RPF1 that keep unsprung mass low for sharper turn-in and grip.
  • Work — the definitive JDM stance and concave look, ideal for dialing in aggressive offset and lip on the S13.
  • ESR — affordable concave fitment that nails the missile-car-to-show-car spectrum without breaking the build budget.

Wheel & fitment guides

Before you commit, learn how ET numbers matter more than wheel width so you can move off that OE ET40 toward the poke or tuck you're after.

Mock it up in the Wheel Visualizer to see them on your 240SX, browse real builds in the customer gallery, then spec a mounted-and-balanced set with the Package Builder.

Cross-shop other years like the 1989, 1990, 1992, and 1993 240SX, or head to the Nissan hub for more.

There are no products listed under this category.

The S13 240SX is the blank canvas of the drift world: a featherweight, rear-drive coupe with near-perfect balance and an aftermarket that never quit. Whether you're chasing tandem entries or a clean street look, the right wheels transform how this chassis behaves and how it sits. Every set here ships free with verified fitment for your 1991 240SX, and financing is available so you can grab the setup you actually want.

1991 Nissan 240SX fitment specs

  • Bolt pattern: 4x114.3
  • Center bore: 66.1mm
  • OE wheel diameter: 15"
  • OE offset: ET40
  • Setup: square (non-staggered)
  • Drivetrain: RWD hatchback

Since 4x114.3 is one of the most supported patterns in the JDM scene, you can shop all 4x114.3 wheels to cross-shop every fitment in your stud spacing.

Recommended setups

  • Enkei — lightweight, time-tested classics like the RPF1 that keep unsprung mass low for sharper turn-in and grip.
  • Work — the definitive JDM stance and concave look, ideal for dialing in aggressive offset and lip on the S13.
  • ESR — affordable concave fitment that nails the missile-car-to-show-car spectrum without breaking the build budget.

Wheel & fitment guides

Before you commit, learn how ET numbers matter more than wheel width so you can move off that OE ET40 toward the poke or tuck you're after.

Mock it up in the Wheel Visualizer to see them on your 240SX, browse real builds in the customer gallery, then spec a mounted-and-balanced set with the Package Builder.

Cross-shop other years like the 1989, 1990, 1992, and 1993 240SX, or head to the Nissan hub for more.