ReadyLift Suspension RL UPPER BALL JOINT 67-3414

The ReadyLift Suspension 67-3414 Upper Ball Joint is a front upper replacement ball joint designed specifically for use with ReadyLift leveling kits, lift kits, block kits, and off-road suspension kits. If you're running a ReadyLift suspension system on your truck and need a quality replacement upper ball joint that's purpose-built for lifted applications, this is the part ReadyLift themselves specifies for their kits — not a generic aftermarket substitute. At under $40, it's an affordable but important component for keeping your lifted truck's front suspension performing properly.

Key Features & Benefits

• Purpose-Built for ReadyLift Suspension Systems: Designed to work specifically with ReadyLift leveling kits, lift kits, block kits, and off-road suspension kits — ensuring proper geometry and performance rather than relying on a generic OEM-style unit that may not account for the altered suspension angles of a lifted truck.
• Front Upper Position: Correctly engineered for the front upper ball joint location, where proper fitment and load ratings matter most for steering response and tire wear on a lifted vehicle.
• Heavy-Duty, OEM-Style Construction: Described by retailers as a superior OEM-style unit built to restore proper suspension performance — giving you confidence that your steering and handling characteristics are maintained after installation.
• Includes Hardware for Installation: Comes with a cotter pin, C-clip, castle nut, and grease fitting (zerk) so you have everything needed for a complete install without a separate hardware run.
• Compatible with Multiple ReadyLift Kit Types: Listed as a compatible component for leveling kits, SST lift kits, block kits, and off-road suspension kits — making it a versatile replacement part across ReadyLift's product lineup.
• Greaseable Design: The included zerk fitting allows you to grease the ball joint during routine maintenance, helping extend service life under demanding conditions.

Specifications

• Brand: ReadyLift Suspension
• Part Number / SKU: 67-3414
• Position: Front Upper
• Application: Leveling Kits, Lift Kits, Block Kits, Off Road Suspension Kits, SST9000 Shocks — ReadyLift suspension systems
• CA Proposition 65 Warning: Not listed as required for this part number per available product data

Fitment

The ReadyLift 67-3414 upper ball joint is intended for use with ReadyLift suspension lift and leveling systems, not as a direct OEM factory replacement. Based on available listing data, this part is associated with 2014–2018 Chevy Silverado 1500 applications. It is listed as compatible with ReadyLift leveling kits, lift kits, block kits, and off-road suspension kits for that platform.

Important: This ball joint is designed for use with ReadyLift upper control arms or ReadyLift suspension kits — it is not a universal ball joint. If you are running a different brand's control arm or a stock upper control arm, this part may not be the correct fitment. Verify that your existing ReadyLift kit specifies the 67-3414 before ordering. If you're unsure whether this part fits your specific ReadyLift system, contact the ThreePiece.us team for fitment assistance before purchasing.

Note: A separate ReadyLift upper ball joint (67-3941) is designed for 2019-and-newer GM 1500 trucks using ReadyLift upper control arms. If your truck is a 2019 or newer GM 1500, verify which ball joint applies to your specific kit.

What's in the Box

• 1x ReadyLift front upper ball joint (67-3414)
• Cotter pin
• C-clip
• Castle nut
• Grease fitting (zerk)

Why Buy from ThreePiece.us

• Free Shipping on Every Order: No minimum purchase required — your ReadyLift ball joint ships free to your door within the continental US.
• Affirm Financing Available: Break your order into manageable payments through Affirm — ideal if you're purchasing multiple suspension components at once.
• Expert Fitment Support: Not sure if the 67-3414 is the right ball joint for your ReadyLift kit? Our team has served 10,000+ customers and can help verify the correct part for your specific suspension setup. Reach us at [email protected] or call 813-535-5801.
• 10+ Years of Suspension & Fitment Experience: ThreePiece.us has been helping truck owners, enthusiasts, and daily drivers get the right parts since 2014.
• Price Match Guarantee: Found this part listed for less elsewhere? Ask about our price match policy.

Frequently Asked Questions

What vehicles does the ReadyLift 67-3414 upper ball joint fit?

Based on available product data, the 67-3414 is associated with 2014–2018 Chevy Silverado 1500 trucks running ReadyLift suspension kits. It is specifically a ball joint for ReadyLift lift and leveling applications — not a direct OEM factory replacement. Always cross-reference with your specific ReadyLift kit documentation to confirm compatibility.

Does this ball joint work with any brand of upper control arm, or only ReadyLift?

The 67-3414 is designed for use with ReadyLift suspension systems. It is not listed as a universal fitment ball joint, so it is best suited for replacing the ball joint within a ReadyLift kit rather than being used with a different brand's upper control arm. If you have questions about compatibility with your specific setup, contact our fitment team before ordering.

Does the 67-3414 come with the hardware needed for installation?

Yes. The ball joint comes with a cotter pin, C-clip, castle nut, and a grease fitting (zerk), so you should have the necessary fasteners included in the box for a straightforward installation.

Is the ReadyLift 67-3414 the same ball joint as the 67-3941?

No — these are two different part numbers for different applications. The 67-3941 is ReadyLift's replacement upper ball joint designed specifically for 2019-and-newer GM 1500 trucks with ReadyLift upper control arms. The 67-3414 is associated with 2014–2018 applications. Make sure to verify which part number your specific ReadyLift kit requires before placing your order.