K&N 19-24 Chevy Silverado (5.3L/6.2L V8) NextGen Cold Air Intake - 50-3110

The K&N Engineering 50-3110 NextGen Cold Air Intake is a purpose-built performance air intake system engineered specifically for the 2019–2024 Chevrolet Silverado 1500 with V8 5.3L or 6.2L fuel-injected engines. Designed as a complete replacement for the restrictive factory airbox, this 50 Series GEN3 system delivers dyno-proven increases in horsepower and torque on your engine's stock tune — no tune required. If you're looking to unlock real, measurable performance from your Silverado without touching the ECU, the K&N 50-3110 is one of the most well-documented bolt-on upgrades available.

Key Features & Benefits

• Dyno-Proven Horsepower & Torque Gains: K&N's own dyno testing documents an estimated gain of 19.07 HP at 5,006 RPM and approximately 19 lb-ft of torque — delivered on your factory tune with no additional tuning required.
• 30.8% Increase in Airflow Volume: The large-diameter, CAD-designed high-density polyethylene (HDPE) rotationally molded intake tube is engineered to increase airflow volume to your engine by 30.8%, boosting air velocity and engine responsiveness.
• NextGen Hybrid Airbox: A custom semi-enclosed airbox lowers intake air temperatures by shielding incoming air from engine bay heat. It features an enlarged fresh air inlet for improved flow and better protection against contaminants compared to open-element setups.
• Oversized Conical Cotton Gauze Air Filter: The red oiled cotton gauze filter uses an increased surface area and radius-entry design to maximize airflow. It is washable and reusable — serviceable up to every 100,000 miles under normal highway driving conditions, saving you money over disposable paper filters.
• Quick-Lock™ Filter Attachment: The filter snaps into place via Quick-Lock™ technology and is secured with a single hose clamp via a sealing bead, reducing mounting hardware and simplifying both installation and future filter services.
• Aggressive Intake Sound, No Cruise Drone: Experience an exciting induction roar during acceleration without unwanted drone at highway cruising speeds — a common complaint with some open-element intakes.
• Simplified ~60-Minute Install: The system is engineered to reduce mounting hardware complexity. Typical installation takes less than 60 minutes with basic hand tools, and all necessary intake tube ports for your specific application are included.
• Lifetime Limited Warranty: K&N backs the 50-3110 with a no-hassle Lifetime Limited Warranty and states the system will preserve your factory powertrain warranty.
• Proudly Engineered in the USA: K&N Engineering has been designing and manufacturing filtration and intake products since 1969.

Specifications

• Part Number: 50-3110
• Product Style: 50 Series GEN3
• Intake Pipe Material: High-Density Cross-Linked Polyethylene (HDPE)
• Intake Pipe Color/Finish: Black
• Air Filter Material: Oiled Cotton Gauze
• Air Filter Color: Red
• Air Filter Shape: Round (Conical/Oversized)
• Air Filter Washable/Reusable: Yes
• Replacement Filter P/N: RU-5302
• Estimated Horsepower Gain: 19.07 HP @ 5,006 RPM
• Estimated Torque Gain: ~19 lb-ft
• Intake CFM Gain: 31 CFM
• Airflow Volume Increase: 30.8%
• Clamp Material: Stainless Steel (Natural Finish, Worm Gear Style)
• Clamps Included: 6
• Couplers Included: 3 (Black)
• Mass Air Flow Sensor Adapter Included: Yes
• Mounting Hardware Included: Yes
• Filter Oil Included: Yes
• Airbox Included: Yes
• Weight: 13 lb (5.9 kg)
• Filter Service Interval: Up to 100,000 miles under normal highway driving conditions
• Warranty: Lifetime Limited
• California Emissions: Not legal for sale or use in California on any pollution-controlled motor vehicle (not CARB legal)
• TÜV Approved (Europe): No

Fitment

The K&N 50-3110 is specifically engineered for the following vehicles:

• 2019–2024 Chevrolet Silverado 1500 — V8 5.3L (F/I)
• 2019–2024 Chevrolet Silverado 1500 — V8 6.2L (F/I)

This intake is designed for fuel-injected V8 applications only. It is not intended for 4-cylinder or V6 Silverado variants. Always confirm your exact engine displacement before ordering. This product is not legal for sale or use in California on any pollution-controlled motor vehicle and does not carry CARB EO approval.

What's in the Box

• NextGen hybrid semi-enclosed airbox
• Large-diameter HDPE rotationally molded intake tube (black)
• Oversized conical red oiled cotton gauze air filter
• 6 stainless steel worm gear clamps (natural finish)
• 3 black couplers
• Mass air flow (MAF) sensor adapter
• All mounting hardware required for the specified application
• Filter oil

Why Buy from ThreePiece.us

At ThreePiece.us, we specialize in performance parts and take fitment seriously. Have a question about whether the K&N 50-3110 works with your specific Silverado build, trim level, or existing modifications? Our team is here to help before you buy — not just after. Every order ships free, no matter the size, so the price you see is the price you pay. Need to spread out the cost? We offer financing through Affirm, so you can get your Silverado performing at its best today and pay over time. Shop with confidence knowing you're getting expert support from people who know these trucks.

Frequently Asked Questions

Q: Do I need a tune after installing the K&N 50-3110 on my Silverado?
A: No. According to K&N Engineering's product documentation, this intake system delivers its dyno-proven horsepower and torque gains on your engine's stock factory tune. No aftermarket tune is required to realize the performance increase.

Q: Will this intake fit both the 5.3L and 6.2L V8 Silverado 1500?
A: Yes. The 50-3110 is engineered to fit the 2019–2024 Chevrolet Silverado 1500 with either the V8 5.3L or V8 6.2L fuel-injected engine. All intake tube ports needed for these applications are included in the kit.

Q: How difficult is the installation, and what's included to complete it?
A: K&N rates installation at typically less than 60 minutes. The kit includes the airbox, intake tube, air filter, 6 stainless steel clamps, 3 couplers, a MAF sensor adapter, mounting hardware, and filter oil — everything needed for a complete install on supported vehicles.

Q: How often does the air filter need to be cleaned, and is it reusable?
A: Yes, the included red cotton gauze filter is washable and reusable. Under normal highway driving conditions, K&N states you can go up to 100,000 miles between filter services. When it does need cleaning, the replacement filter part number is RU-5302.