Truck and SUV

Truck and SUV: bolt-on protection, storage and access for the working end of your rig

Truck and SUV exterior parts cover the hardware that makes a pickup bed usable and shields the underside from trail and road hits. A tonneau cover keeps cargo dry and out of sight and cleans up the airflow over an open bed. Side steps give you a reliable foot placement to climb into a lifted cab. Skid plates take the impact that would otherwise land on your oil pan, transfer case or fuel tank. These are jobs that get done with hand tools and existing mount points, so most of what we stock here is a genuine bolt-on rather than a fabrication project.

What ThreePiece stocks

This category runs 427 products from 3 brands. The bulk of the range is BakFlip bed covers (424 of the sampled items), with ReadyLift Suspension and Falcon Shocks filling out the skid plate and underbody side. Prices currently run from $66 to $2,190 - that is the live range on what is in stock right now, not a locked-in quote. At the low end you get parts like the ReadyLift GM 1500 front skid plate and the ReadyLift Tundra TRD Pro skid plate spacer kit; the Falcon Shocks rear shock skid plate kit sits in the middle. Bed covers reach the top of the range, like the BakFlip BFMX4 for the 07-21 Tundra 5.7ft bed and the BakFlip RX4S for the 22-23 Tundra 6.6ft bed.

Of the full range, 253 products carry fitment data, spanning model years 1988 to 2023. Vehicles named in that data include the Nissan Titan, Toyota Tundra, Chevrolet Colorado, Ford Ranger, Honda Ridgeline, Toyota Tacoma, Nissan Frontier, Ford F150, GM Sierra, Ford Super Duty and Chevrolet Silverado, among others.

How to choose

Start with the job. If you haul cargo and want it covered, a bed cover is the buy - and here the choice is bed length, so measure your bed and match the part exactly (a 5.7ft cover will not fit a 6.6ft bed). If you run trails or gravel, prioritise skid plates for the components hanging lowest. The trade-off across this category is clear from the price spread: a skid plate is a small under-$115 buy, while a full folding bed cover is a several-hundred-to-two-thousand-dollar investment. Browse the sub-categories to narrow it down - Truck Bed Covers, Side Steps, Storage Boxes, Truck Bed Extenders and Fuel Door.

What else you need with it

Truck and SUV work usually pairs with a few other exterior upgrades. Look at Mud Flaps to keep spray off the body, Bumper Accessories and Tow Hooks for recovery points, and the wider Lighting range for anyone adding auxiliary light. All of it lives under the Exterior section.

Fitment and ordering

Check your bed length and model year before you order, and if you are unsure, use the fitment calculator or call fitment help at 813-535-5801. We offer free shipping on all orders plus Affirm and Katapult financing.

Truck and SUV: bolt-on protection, storage and access for the working end of your rig

Truck and SUV exterior parts cover the hardware that makes a pickup bed usable and shields the underside from trail and road hits. A tonneau cover keeps cargo dry and out of sight and cleans up the airflow over an open bed. Side steps give you a reliable foot placement to climb into a lifted cab. Skid plates take the impact that would otherwise land on your oil pan, transfer case or fuel tank. These are jobs that get done with hand tools and existing mount points, so most of what we stock here is a genuine bolt-on rather than a fabrication project.

What ThreePiece stocks

This category runs 427 products from 3 brands. The bulk of the range is BakFlip bed covers (424 of the sampled items), with ReadyLift Suspension and Falcon Shocks filling out the skid plate and underbody side. Prices currently run from $66 to $2,190 - that is the live range on what is in stock right now, not a locked-in quote. At the low end you get parts like the ReadyLift GM 1500 front skid plate and the ReadyLift Tundra TRD Pro skid plate spacer kit; the Falcon Shocks rear shock skid plate kit sits in the middle. Bed covers reach the top of the range, like the BakFlip BFMX4 for the 07-21 Tundra 5.7ft bed and the BakFlip RX4S for the 22-23 Tundra 6.6ft bed.

Of the full range, 253 products carry fitment data, spanning model years 1988 to 2023. Vehicles named in that data include the Nissan Titan, Toyota Tundra, Chevrolet Colorado, Ford Ranger, Honda Ridgeline, Toyota Tacoma, Nissan Frontier, Ford F150, GM Sierra, Ford Super Duty and Chevrolet Silverado, among others.

How to choose

Start with the job. If you haul cargo and want it covered, a bed cover is the buy - and here the choice is bed length, so measure your bed and match the part exactly (a 5.7ft cover will not fit a 6.6ft bed). If you run trails or gravel, prioritise skid plates for the components hanging lowest. The trade-off across this category is clear from the price spread: a skid plate is a small under-$115 buy, while a full folding bed cover is a several-hundred-to-two-thousand-dollar investment. Browse the sub-categories to narrow it down - Truck Bed Covers, Side Steps, Storage Boxes, Truck Bed Extenders and Fuel Door.

What else you need with it

Truck and SUV work usually pairs with a few other exterior upgrades. Look at Mud Flaps to keep spray off the body, Bumper Accessories and Tow Hooks for recovery points, and the wider Lighting range for anyone adding auxiliary light. All of it lives under the Exterior section.

Fitment and ordering

Check your bed length and model year before you order, and if you are unsure, use the fitment calculator or call fitment help at 813-535-5801. We offer free shipping on all orders plus Affirm and Katapult financing.