Belltech 2021+ Ford Bronco 4WD (w/o Sasquatch PKG) Forged Control Arm Kit - 252003

It is listed for: 2021-2023 Ford Bronco; 2021-2024 Ford Bronco; 2022-2024 Ford Bronco. Pick your vehicle on this page to check your exact year and trim.

The maker's installation guide is on this page — see Installation guide under the part details for the step-by-step and the torque figures. Work on level ground with the car properly supported, and torque every fastener to the maker's figure. If the job is beyond your tools, any shop that does this kind of work can fit it.

Yes, every time a control arm is replaced: its ball joint and bushings set camber and toe.

Usually, when the arm is a complete assembly; the Part details and the maker's guide say what is included.

A lowered or lifted car pushes camber outside the stock range; adjustable arms bring it back so the tires wear evenly.

Replace both sides when the car is lowered or lifted so both corners adjust the same way. A single worn arm can be replaced on its own.

Torque the bushing bolts with the car at ride height, not hanging on a lift, or the bushings bind and wear early.

Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.