Free Shipping on All Wheel & Tire Packages
Questions? Call or text our team 813-535-5801
KMC KM651 Slide 24x9.5 +25 Nitto NT420V 305/35R24 Lowering springs Flush stance
2016 Toyota Tundra
This 2016 Toyota Tundra is running KMC KM651 Slide in 24x9.5 +25 at all four corners, wrapped in 305/35R24 Nitto NT420V tires.
It sits on lowering springs with a flush stance, meaning the wheel face lines up with the fender.
If you are searching for Toyota Tundra wheel fitment, KMC KM651 Slide on a Toyota Tundra, 24x9.5 +25 wheels on a Tundra, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.
The wheels are 24-inch in diameter and 9.5 inches wide with a +25 offset, in the 6x135 bolt pattern the Toyota Tundra uses.
A +25 offset on a 9.5-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in.
KMC KM651 Slide 24x9.5 +25 on a Toyota Tundra is a common Tundra question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.
The tire size is 305/35R24: a 305 mm section width with a 35 aspect ratio on the 24-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).
The owner chose Nitto NT420V. We stock Lionhart LH-Ten 305/35R24 112V - LHST102435010 at $179 each in this size, and other 305/35R24 tires through the 305/35R24 tire search.
Searching for 305/35R24 tires on a Toyota Tundra, or the right tire size for 24x9.5 +25 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.
The drop comes from lowering springs, the simplest way to close the fender gap on a Toyota Tundra while keeping the factory shocks.
No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.
Stance: flush. The wheel face lines up with the fender. Flush fitment on a Toyota Tundra comes down to the offset and width above; copy them and you get the same result.
Will KMC KM651 Slide 24x9.5 +25 fit a 2016 Toyota Tundra? This owner's answer is yes, on lowering springs, with no rubbing.
6 other Toyota Tundra builds in the gallery run sizes like 24x12, 20x10, 17x9, 18x9, so you can compare offsets, tire sizes and suspension before you order. See all Toyota builds.
Our fitment guarantee covers wheels bought through wheels that fit the 2016 Toyota Tundra: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.
We sell this exact wheel: KMC KM651 SLIDE 6X135/6X139.7 24X9.5 +25 GLOSS BLACK is $444 each, about $1,776 for the set of four. Add tires on the product page and it ships as a mounted and balanced Toyota Tundra wheel and tire package with free shipping.
Financing is available on every set, and 2016 Toyota Tundra wheels ship free when bought as a wheel and tire package.
Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Toyota Tundra and size before you order, and add your own ride once it is done so the next owner can see what fits.