Aodhan AFF2 5x114.3 19x9.5+35 Matte Black + Lexani LX-TWENTY 235/35R19 — 2021 Nissan Altima SV Wheel & Tire Package

Dialed in specifically for the 2021 Nissan Altima SV, this complete package pairs wheels and tires selected to sit aggressively flush with the fenders while respecting the Altima's front-wheel-drive geometry and clearance limits. Every set ships mounted, balanced, and matched to your car's bolt pattern and hub bore, so it's ready to torque down and drive the moment it lands on your doorstep.

The Aodhan AFF2 lines up perfectly with your 2021 Altima SV's 5x114.3 bolt pattern, so it drops right onto the factory hubs without adapters. At 19x9.5 with a +35 offset, this wheel pushes the face out toward the fender lip for the aggressive flush look you're chasing—a noticeably wider and more purposeful setup than the Altima's stock footprint. The Matte Black finish keeps it clean and understated against the Altima's bodywork, and the flow-formed AFF2 face brings the depth to fill those arches convincingly.

The Lexani LX-TWENTY in 235/35R19 brings an ultra-high-performance touring compound that suits your 2021 Altima SV's aggressive flush setup. The low-profile 35-series sidewall tightens up steering response and keeps the fitment looking planted at the fender, while the tread's silica-based design holds grip through dry corners and clears water on wet commutes. For a daily-driven Altima running flush, it balances sharp turn-in with enough ride comfort for real-world miles.

This complete wheel and tire package for the 2021 Nissan Altima SV ships as a bolt-on set: four wheels, four mounted and balanced tires, and the hardware to fit them, including TPMS sensors so the dash warning light stays off. The 5x114.3 bolt pattern and 66.1mm hub bore are matched to the vehicle, and hub-centric rings seat the wheels precisely on the hubs.

The vehicle's hub bore is 66.1mm. This package includes hub-centric rings to center the wheel precisely on the hub, eliminating vibration.

Everything in this package

• 4× Aodhan AFF2 5x114.3 19x9.5+35 Matte Black — SKU: AFF219955114335MB
• 4× Lexani LX-TWENTY 235/35R19 (235/35R19) — SKU: LXST201935040
• 20× Chrome cone-seat lug nuts
• 4× Hub-centric rings
• 4× TPMS sensors

Installation & fitment notes

This 19x9.5 +35 AFF2 shares your Altima's factory 5x114.3 bolt pattern, so it bolts to the stock hubs without adapters. The AFF2's hub bore is 73.1mm , while the Altima's hub is 66.1mm , so run 73.1→66.1 hubcentric rings to center the wheel and eliminate vibration. Reuse your existing lug nuts and transfer TPMS sensors during mounting. This wider, +35 setup sits about 7mm further outboard than stock; for street use it's a clean bolt-on, but we recommend a post-install alignment to set camber/toe and a quick clearance check at full lock and full suspension travel before hard driving.

Fitment specifications

Preview this setup on your 2021 Nissan Altima SV

Mounted, balanced, and ready to bolt on. In stock and ships as a complete set.

Curated and fitment-verified by The ThreePiece Fitment Team.