Konig Hypergram 5x120 18x8.5+35 Matte Grey + Falken FAL Azenis RT615K+ 255/40R17 — 2021 Honda Civic Type R Limited Edition Wheel & Tire Package

The 2021 Civic Type R Limited Edition already runs a track-sharpened chassis, so this package is engineered to complement its FK8 geometry with wheels sized and offset to clear the beefy Brembo front calipers and preserve the LE's razor-sharp turn-in. Every set ships fully mounted, balanced, and torque-matched to your FK8's 5x120 hub spec, so you can bolt on, set your pressures, and hit the track without a second guess.

The Konig Hypergram in 18x8.5 +35 matches the 5x120 bolt pattern of your 2021 Civic Type R Limited Edition directly, no adapters needed. That width and offset give you room for a serious performance tire without unnecessary hassle, keeping the front-drive chassis planted through corners where the Type R earns its reputation. The Matte Grey finish plays cleanly against the LE's aggressive bodywork, whether you run the factory Championship White or something else. It's a purpose-built fitment for a track-capable Honda that already knows how to attack apexes.

The Azenis RT615K+ is a 200-treadwear extreme performance summer tire, and in 255/40R17 it's a natural fit for the track-hungry Civic Type R Limited Edition. The dedicated R-compound bites hard on autocross and lapping days, rewarding the FK8's chassis with sharp turn-in and predictable breakaway. The taller sidewall of the 17-inch fitment adds compliance over curbing and street imperfections, making this a serious grip play you can still drive to the circuit.

This complete wheel and tire package for the 2021 Honda Civic Type R Limited Edition ships as a bolt-on set: four wheels, four mounted and balanced tires, and the hardware to fit them, including TPMS sensors so the dash warning light stays off. The 5x120 bolt pattern and 64.1mm hub bore are matched to the vehicle, and hub-centric rings seat the wheels precisely on the hubs.

The vehicle's hub bore is 64.1mm. This package includes hub-centric rings to center the wheel precisely on the hub, eliminating vibration.

Everything in this package

• 4× Konig Hypergram 5x120 18x8.5+35 Matte Grey — SKU: HG8852035G
• 4× Falken FAL Azenis RT615K+ 255/40R17 (255/40R17) — SKU: 28538003
• 20× Chrome cone-seat lug nuts
• 4× Hub-centric rings
• 4× TPMS sensors

Installation & fitment notes

This is a clean bolt-on for your FK8 Limited Edition. Konig lists this Hypergram in the correct 5x120 pattern, matching the Type R's hub, and at 18x8.5 +35 it sits just 9mm further outboard than the factory 8.5-width wheel—well within the conservative FK8 wheel wells. No fender roll, no camber adjustment, and no spacers are needed for this square street setup.

Two hardware points to get right on install: the Hypergram uses a 73.1mm center bore, so run 73.1→64.1mm hubcentric rings to center the wheels vibration-free on the Type R's 64.1mm hub. And the FK8 uses M14x1.5 lug hardware with a ball seat—confirm your lug nuts match the Hypergram's seat type before mounting. Torque to 94 lb-ft.

One note: an 18x8.5 wheel takes an 18" tire; the 255/40R17 size listed is a 17" tire and won't mount on this 18" wheel. For this width, a 255/40R18 (as run successfully on the same 8.5–9.5 width

Fitment specifications