Enkei EKM3 442 5x120 18x8+42 Gun Metal + Nexen NEX N'Fera AU7 235/40R18 — 2021 Honda Civic Type R Limited Edition Wheel & Tire Package

The 2021 Civic Type R Limited Edition already runs a track-focused chassis with widened front fenders, so we've built this package to exploit every millimeter of that clearance for a genuinely flush setup that clears the front strut geometry and rear quarters without rubbing under load. Everything ships mounted, balanced, and torque-matched to your FK8's 5x120 hub-centric spec, so it bolts straight on and you're ready to attack corners the moment it arrives.

The Enkei EKM3 442 in 18x8 +42 bolts straight to the Type R LE's factory 5x120 pattern, keeping your hub-centric fitment true and honest. That +42 offset pulls the wheel face outward toward the fender line, giving you the aggressive flush look this chassis wears so well without fighting the LE's already track-focused geometry. The Gun Metal finish plays cleanly against the Type R's aggressive bodywork, and at 18x8 you've got room to run a proper performance tire on Honda's sharpest front-driver.

The N'Fera AU7 is an ultra-high-performance summer tire, and its stiff, responsive tread pattern rewards the Type R Limited Edition's sharpened chassis on turn-in and corner exit. On a 235/40R18, it fills the flush setup cleanly while keeping ride quality civilized for street driving. The compound bites on warm pavement for confident grip during aggressive canyon runs and spirited commutes, backing the LE's track-focused intent without punishing daily comfort.

This complete wheel and tire package for the 2021 Honda Civic Type R Limited Edition ships as a bolt-on set: four wheels, four mounted and balanced tires, and the hardware to fit them, including TPMS sensors so the dash warning light stays off. The 5x120 bolt pattern and 64.1mm hub bore are matched to the vehicle, and hub-centric rings seat the wheels precisely on the hubs.

The vehicle's hub bore is 64.1mm. This package includes hub-centric rings to center the wheel precisely on the hub, eliminating vibration.

Everything in this package

• 4× Enkei EKM3 442 5x120 18x8+42 Gun Metal — SKU: 442-880-1242GM
• 4× Nexen NEX N'Fera AU7 235/40R18 (235/40R18) — SKU: 15231NXK
• 20× Chrome cone-seat lug nuts
• 4× Hub-centric rings
• 4× TPMS sensors

This is a clean bolt-on for your FK8 Limited Edition. The 5x120 pattern matches your Type R directly, and 235/40R18 is a factory-approved size for this car, so overall diameter and speedometer accuracy stay correct. At 18x8 +42, this setup sits just 2mm more outboard than stock and tucks well inside the widebody fenders on stock ride height—no fender rolling, camber, or trimming needed.

Two mounting details: the EKM3's hub bore is 72.6mm, larger than the Type R's 64.1mm hub, so run 72.6→64.1mm hubcentric rings to center the wheels properly. Reuse your factory M14x1.5 lug nuts (verify a conical seat matches the wheel), and torque to spec. No spacers required.

Installation & fitment notes

This is a clean bolt-on for your FK8 Limited Edition. The 5x120 pattern matches your Type R directly, and 235/40R18 is a factory-approved size for this car, so overall diameter and speedometer accuracy stay correct. At 18x8 +42, this setup sits just 2mm more outboard than stock and tucks well inside the widebody fenders at stock ride height—no fender rolling, camber, or trimming needed.

Two mounting details: the EKM3's bore size is 72.6mm , larger than the Type R's 64.1 mm hub

Fitment specifications

Preview this setup on your 2021 Honda Civic Type R Limited Edition

Mounted, balanced, and ready to bolt on. In stock and ships as a complete set.

Curated and fitment-verified by The ThreePiece Fitment Team.