Aodhan AFF7 5x120 18x9.5+35 Gloss Silver Machined Face + Nexen NEX N'Fera AU7 255/35R18 — 2021 Honda Civic Type R Limited Edition Wheel & Tire Package

The 2021 Civic Type R Limited Edition already runs a track-focused chassis and wide 245-section footprint from the factory, so this package is engineered to hug those FK8 fenders with a tight, flush setup that respects the car's front-drive geometry and stiff spring rates. Every wheel arrives mounted, balanced, and matched to your Type R with the correct 5x120 bolt pattern and 64.1mm hub bore, ready to bolt on and hit the road or the apex.

The AFF7 in 18x9.5 +35 is dialed in for the Civic Type R Limited Edition's 5x120 hubs, delivering the aggressive flush setup this chassis begs for. That width and offset push the face out toward the fender line for a filled arch without fighting the FK8's factory suspension geometry, and the 18-inch diameter keeps you in the sweet spot for grippy performance rubber. The Gloss Silver Machined Face nods to the LE's Phoenix Yellow, sharpening the look while staying true to the car's track-bred intent.

The N'Fera AU7's ultra-high-performance summer compound is built for exactly what the Type R Limited Edition demands: sharp turn-in, predictable grip when you're leaning on the chassis, and dependable dry and wet traction for spirited street and track-day use. At 255/35R18, this tire fills the aggressive flush setup cleanly, keeping sidewall flex in check for responsive steering feel while retaining enough compliance to keep daily driving livable.

This complete wheel and tire package for the 2021 Honda Civic Type R Limited Edition ships as a bolt-on set: four wheels, four mounted and balanced tires, and the hardware to fit them, including TPMS sensors so the dash warning light stays off. The 5x120 bolt pattern and 64.1mm hub bore are matched to the vehicle, and hub-centric rings seat the wheels precisely on the hubs.

The vehicle's hub bore is 64.1mm. This package includes hub-centric rings to center the wheel precisely on the hub, eliminating vibration.

Everything in this package

• 4× Aodhan AFF7 5x120 18x9.5+35 Gloss Silver Machined Face — SKU: AFF71895512035SMF
• 4× Nexen NEX N'Fera AU7 255/35R18 (255/35R18) — SKU: 15232NXK
• 20× Chrome cone-seat lug nuts
• 4× Hub-centric rings
• 4× TPMS sensors

Installation & fitment notes

This 18x9.5 +35 square setup with 255/35R18 is the most aggressive flush fitment the FK8 chassis takes, sitting about 9mm further outboard than the factory 20x8.5 +60 wheels. It bolts to the factory 5x120 pattern and uses the stock M14x1.5 lugs and 64.1mm hub, so no spacers or lug changes are needed. At 18x9.5 +35 with 255/35R18, this is maximum flush street fitment; it requires front fender liner tab modification and roughly -2.0° camber. The narrower 255/35 sidewall keeps you clear of fender rolling at stock ride height; lowering increases rub risk up front. Have an alignment set afterward.

Fitment specifications

Preview this setup on your 2021 Honda Civic Type R Limited Edition

Mounted, balanced, and ready to bolt on. In stock and ships as a complete set.

Curated and fitment-verified by The ThreePiece Fitment Team.