Enkei Raijin 5x114.3 18x9.5+35 Black + Nexen NEX N'Fera AU7 255/40R18 — 2021 Honda Accord EX-L Wheel & Tire Package

Your 2021 Accord EX-L rides on a chassis that rewards a proper wheel and tire upgrade, and this package is spec'd specifically for that platform's 5x114.3 bolt pattern and 64.1mm hub bore to deliver sharper turn-in and cleaner power delivery from the 1.5T or 2.0T. Every set arrives fully mounted, hub-centric balanced, and torque-matched to your Accord's specs, so you bolt on a performance-ready setup without a second trip to the shop.

The Enkei Raijin lines up perfectly with your Accord's 5x114.3 bolt pattern, so fitment is native—no adapters, no guesswork. Stepping up to an 18x9.5 with a +35mm offset gives the EX-L a wider, more aggressive footprint than the factory setup, letting you run a broader performance tire for improved grip and turn-in bite. The extra width pushes the wheel face out toward the fender for a purposeful, planted look on this generation Accord, and the black finish keeps the aesthetic clean and focused on a serious driving build.

The Nexen N'Fera AU7 in 255/40R18 gives your Accord EX-L an ultra-high-performance summer footprint that turns its 2.0T into a genuinely sharp handler. The wide 255 section and 40-series sidewall sharpen turn-in and mid-corner grip, while the AU7's tuned tread keeps highway manners composed for daily driving. It's a confident match for spirited backroad runs without punishing your commute—exactly the balance a performance-minded Accord build wants.

This complete wheel and tire package for the 2021 Honda Accord EX-L ships as a bolt-on set: four wheels, four mounted and balanced tires, and the hardware to fit them, including TPMS sensors so the dash warning light stays off. The 5x114.3 bolt pattern and 64.1mm hub bore are matched to the vehicle, and hub-centric rings seat the wheels precisely on the hubs.

The vehicle's hub bore is 64.1mm. This package includes hub-centric rings to center the wheel precisely on the hub, eliminating vibration.

Everything in this package

• 4× Enkei Raijin 5x114.3 18x9.5+35 Black — SKU: 467-895-6535BK
• 4× Nexen NEX N'Fera AU7 255/40R18 (255/40R18) — SKU: 14421NXK
• 20× Chrome cone-seat lug nuts
• 4× Hub-centric rings
• 4× TPMS sensors

Installation & fitment notes

Good news for your EX-L: this is a clean bolt-on. The Enkei Raijin's 5x114.3 bolt pattern matches your Accord exactly, and most Honda Accord models use a 64.1mm center bore, and when a wheel's center bore matches the hub, the vehicle achieves hub-centric fitment — the hub carries the car's weight, not the lug nuts. Verify the Raijin's bore is 64.1mm; if it's larger, add hub-centric rings.

At 18x9.5 at +35mm with a 255/40 tire, this delivers flush or nearly flush results with minimal fender work on most setups. On a stock-height EX-L, this square setup runs 10mm more outboard than factory but tucks under the fender—no fender roll, camber arms, spacers, or trimming required. Reuse your factory conical lug nuts, and transfer your existing TPMS sensors to keep the dash warning off.

Fitment specifications

Preview this setup on your 2021 Honda Accord EX-L

Mounted, balanced, and ready to bolt on. In stock and ships as a complete set.

Curated and fitment-verified by The ThreePiece Fitment Team.