OE Wheels DG15 5x115 20x9+18 Satin Black + Nexen NEX N'Fera SUR4G 275/40R20 — 2021 Dodge Charger SXT Wheel & Tire Package
Free Shipping
This wheel on real customer builds
Verify parts fit & get product recommendations
Skip the gamble
Piecing a setup together yourself means guessing — an offset that rubs the fender, a tire shop that won’t mount wheels you didn’t buy there, an expensive set that doesn’t clear your brakes. A package skips all of it. Our fitment team verifies every number against your exact vehicle, then it ships mounted, balanced, and ready to bolt on. If a fitment we verified turns out wrong, that’s our mistake — and we make it right.
This complete package transforms your 2021 Charger SXT with an aggressive flush setup engineered specifically for the LD platform's strut geometry and fender clearances, so the wheels sit tucked tight to the arches without rubbing on turn-in or over broken pavement. Every wheel arrives mounted, road-force balanced, and torque-matched to your Charger's 5x115 bolt pattern and factory hub bore, ready to bolt on straight out of the box.
The DG21 in 20x10 +18 nails the aggressive flush look you're after on the 2021 Charger SXT. That +18 offset pulls the wheel face out toward the fender edge, filling the arch and giving you that planted, wide footprint the RWD Charger platform wears so well. The 5x115 bolt pattern is a direct match, so there's no adapter guesswork here. Finished in Satin Bronze, it adds a factory-plus attitude that plays perfectly against the Charger's aggressive body lines.
The Nexen N'Fera SUR4G is a summer performance tire built to reward the Charger SXT's rear-drive character, and 275/40R20 fills out an aggressive flush setup with serious footprint. Its ultra-high-performance compound bites hard through corners and hard launches while the 40-series sidewall keeps that flush look planted and composed over broken pavement—dialed-in grip for spirited street driving without punishing your daily commute.
This complete wheel and tire package for the 2021 Dodge Charger SXT ships as a bolt-on set: four wheels, four mounted and balanced tires, and the hardware to fit them, including TPMS sensors so the dash warning light stays off. The 5x115 bolt pattern and 71.6mm hub bore are matched to the vehicle, and hub-centric rings seat the wheels precisely on the hubs.
The vehicle's hub bore is 71.6mm. This package includes hub-centric rings to center the wheel precisely on the hub, eliminating vibration.
This is a clean bolt-on for the RWD SXT. The DG21 matches the Charger's factory 5x115 bolt pattern and 71.6mm hub bore, so it seats hub-centric with no spacers or hub rings—just torque the factory-style lug nuts to spec (roughly 110 lb-ft).
The 275/40R20 is a factory-fitted size on 20-inch Chargers, and at 20x10 +18 this wheel sits only 2mm further outboard than stock, keeping the tire well inside the fender line. No fender roll, camber adjustment, or trimming is required. Retorque after the first 25–50 miles.
| Vehicle | 2021 Dodge Charger SXT |
|---|---|
| Bolt pattern | 5x115 |
| Wheel size | 20x10 |
| Wheel offset | +18mm |
| Hub bore | 71.6mm |
| Tire size | 275/40R20 |
| Fitment | Square |
Preview this setup on your 2021 Dodge Charger SXT
Mounted, balanced, and ready to bolt on. In stock and ships as a complete set.
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!