OE Wheels DG15 5x115 20x9+18 Satin Black + Nexen NEX N'Fera SUR4G 275/40R20 — 2021 Dodge Charger SXT Wheel & Tire Package

This complete wheel and tire package is dialed in for the 2021 Charger SXT's 5x115 bolt pattern and factory hub bore, delivering a bolt-on upgrade that clears the SXT's brake package while filling those generous rear-drive arches with the correct offset for daily street driving. Every set ships mounted, road-force balanced, and torque-matched to your Charger's specs, so it arrives ready to install with hardware and hub-centric fitment sorted before it ever leaves our shop.

The OE Wheels DG15 speaks directly to the 2021 Charger SXT with its factory-correct 5x115 bolt pattern, so it bolts up without adapters or guesswork. At 20x9 with a +18mm offset, it fills the SXT's arches confidently while keeping the wheel face positioned for clean, rub-free street driving. The Satin Black finish gives the Charger a purposeful, blacked-out look that pairs well with the car's aggressive body lines—an easy upgrade for a daily-driven build that wants OE-style fitment with sharper attitude.

The N'Fera SUR4G is a max-performance summer tire, and in 275/40R20 it puts a wide, confident contact patch under your Charger SXT for street-focused grip. The asymmetric summer compound delivers responsive dry cornering and dependable wet traction for daily driving, while the 40-series sidewall on a 20-inch wheel balances sharp steering feel with enough cushion to keep everyday ride quality composed on real roads.

This complete wheel and tire package for the 2021 Dodge Charger SXT ships as a bolt-on set: four wheels, four mounted and balanced tires, and the hardware to fit them, including TPMS sensors so the dash warning light stays off. The 5x115 bolt pattern and 71.6mm hub bore are matched to the vehicle, and hub-centric rings seat the wheels precisely on the hubs.

The vehicle's hub bore is 71.6mm. This package includes hub-centric rings to center the wheel precisely on the hub, eliminating vibration.

Everything in this package

• 4× OE Wheels DG15 5x115 20x9+18 Satin Black — SKU: DG15-20090-5115-18B1
• 4× Nexen NEX N'Fera SUR4G 275/40R20 (275/40R20) — SKU: 17387NXK
• 20× Chrome cone-seat lug nuts
• 4× Hub-centric rings
• 4× TPMS sensors

Installation & fitment notes

This is a clean bolt-on for your rear-wheel-drive 2021 Charger SXT—no fender rolling, trimming, or suspension changes required. The DG15's 5x115mm bolt pattern matches every modern Charger , and the 71.6mm hub bore is factory hub-centric , so the wheel seats directly on the hub with no hub rings needed. At only 2mm more aggressive than factory, the 20x9 +18 sits well within safe fender clearance—a nearly identical 20x9 +18 with 275/40R20 on stock suspension needs no modification and shows no rubbing or scrubbing . The 275/40R20 is a factory-approved size on a 9" wheel, so speedometer and diameter stay correct. Just torque to spec after mounting and re-check after roughly 50 miles.

Note: this square setup applies to RWD SXT models; AWD Chargers carry different front clearance and are not covered here.

Fitment specifications

Preview this setup on your 2021 Dodge Charger SXT

Mounted, balanced, and ready to bolt on. In stock and ships as a complete set.

Curated and fitment-verified by The ThreePiece Fitment Team.