This complete package transforms your 2021 Dodge Charger SXT with an aggressive flush setup dialed in for that wide-body Mopar footprint, with wheel width, offset, and tire sizing matched to sit tight to the fenders without rubbing through the rear-drive geometry. Everything ships mounted, balanced, and torque-ready for your Charger's 5x115 bolt pattern, so you bolt on a corner-perfect fitment straight out of the crate.
The American Racing AR927 Barrage locks straight onto your 2021 Charger SXT's 5x115 bolt pattern, no adapters required. At 20x9 with a +20mm offset, this setup pushes the wheel face outward to sit closer to the fender edge, giving you that aggressive flush look the SXT's wide body deserves. The satin black finish plays cleanly against the Charger's sheetmetal, whether you're running factory paint or a blacked-out theme. Squared 20x9 sizing front and rear keeps your fitment consistent and simplifies tire selection.
The N'Fera SUR4G is a summer performance tire built for warm-weather grip, making it a natural fit for your Charger SXT's aggressive flush setup. In 275/40R20, it puts a wide, planted contact patch under the rear-drive Charger for confident cornering and strong dry traction, while the compound stays responsive during spirited street driving. It's a purposeful match for a look-focused build that still needs real-world bite on daily backroad runs.
This complete wheel and tire package for the 2021 Dodge Charger SXT ships as a bolt-on set: four wheels, four mounted and balanced tires, and the hardware to fit them, including TPMS sensors so the dash warning light stays off. The 5x115 bolt pattern and 71.6mm hub bore are matched to the vehicle, and hub-centric rings seat the wheels precisely on the hubs.
The vehicle's hub bore is 71.6mm. This package includes hub-centric rings to center the wheel precisely on the hub, eliminating vibration.
Everything in this package
- 4× American Racing AR927 BARRAGE 5X115 20X9 +20 SATIN BLACK — SKU: AR92729015720
- 4× Nexen NEX N'Fera SUR4G 275/40R20 (275/40R20) — SKU: 17387NXK
- 20× Chrome cone-seat lug nuts
- 4× Hub-centric rings
- 4× TPMS sensors
Installation & fitment notes
This is a clean bolt-on for your RWD 2021 Charger SXT. The AR927's 5x115 bolt pattern matches your car directly, and its +20mm offset sits right in the factory range, so it tucks like stock with no poke or clearance concerns. The Charger's hub bore is 71.6mm—verify the wheel is hub-centric or run hub rings for vibration-free seating. The 275/40R20 is a factory-spec tire on a 20x9 width, filling the wells cleanly with no rubbing at stock ride height. No fender roll, spacers, camber adjustment, or trimming required—just mount, balance, and torque to spec.
Note: this guidance applies to your RWD SXT; AWD models use different offset geometry and this setup is not confirmed for AWD.
Fitment specifications
| Vehicle | 2021 Dodge Charger SXT |
|---|
| Bolt pattern | 5x115 |
|---|
| Wheel size | 20x9 |
|---|
| Wheel offset | +20mm |
|---|
| Hub bore | 71.6mm |
|---|
| Tire size | 275/40R20 |
|---|
| Fitment | Square |
|---|
Preview this setup on your 2021 Dodge Charger SXT
Mounted, balanced, and ready to bolt on. In stock and ships as a complete set.
Curated and fitment-verified by The ThreePiece Fitment Team.
Price Match Guarantee 
Free Mount & Balance
Free Shipping
LOW STOCK (3 wheels)
